TAIXI Pneumatic Hydraulic Co.,Ltd. Are Professional Pneumatic Air Cylinder Actuator Manufacturers And Suppliers. Contact Us
HOME / ALL PRODUCTS

Damage of electrical linear actuator components and remedy according to symptoms

Author : TAIXI Date : 2019-05-25 Views : 1418

In fact, although there are many differences in the external structure of the electrical linear actuator used in many different products, its electrical principle is the same. Therefore, when encountering problems related to electrical faults, the maintenance methods may be the same. Now let's get to know the details.
For example, when testing an electrical linear actuator, we found that its inner tube has been seriously bent and has lost its use value. At the same time, due to the long downtime, there may be some other damaged components. At this time, if the motor is forced to start, it will probably lead to the damage of the motor and the components of the transmission mechanism.
Therefore, in this case, we should first take out the gearbox, and then turn on the power supply for the motor to start. If we hear the "squeak" sound of the motor in operation, it means that there are certain abnormalities in the motor, and the relevant components of the motor and the electrical linear actuator should be dismantled and repaired in time. If there is any debris between the copper sleeve and the rotating shaft in the motor, then all the components should be removed first and then decontaminated with gasoline.
Then wait for a period of time to allow enough time for the gasoline to volatilize. After the gasoline has been volatilized, apply appropriate amount of butter to the rotating shaft and copper sleeve of the electrical linear actuator motor, and assemble the components together. Then connect with the antenna controller and electrify it. Then it can run normally.
So, how to repair some other components of the electrical linear actuator? Usually, its components mainly include push rod inner tube, screw rod and jacket. The inner pipe is mainly connected with the screw and the jacket by using plastic screw and hard rubber sleeve. Then, according to the damage of the electrical linear actuator assembly, symptomatic repair is taken respectively.